Тема: Zyxel Forum - Forums > Ethernet Router/Gateway

Choose an IP address Choose an IP address, and collect other information needed in order to assign a static IP address to your computer. In your router administration.

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

Some large /8 blocks of IPv4 addresses , the former Class A network blocks, are assigned in whole to single organizations or related groups of organizations, either by the Internet Corporation for Assigned Names and Numbers (ICANN), through the Internet Assigned Numbers Authority (IANA), or a regional Internet registry.

As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University , formerly using 36.0.0.0/8 (now to APNIC ) have returned their allocated blocks to assist in the delay of the exhaustion date.

Ethernet / ˈ iː θ ər n ɛ t / is a family of computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). [1] It was commercially introduced in 1980 and first standardized in 1983 as IEEE 802.3 , [2] and has since been refined to support higher bit rates and longer link distances. Over time, Ethernet has largely replaced competing wired LAN technologies such as token ring , FDDI and ARCNET.

The original 10BASE5 Ethernet uses coaxial cable as a shared medium , while the newer Ethernet variants use twisted pair and fiber optic links in conjunction with hubs or switches. Over the course of its history, Ethernet data transfer rates have been increased from the original 2.94 megabits per second (Mbit/s) [3] to the latest 100 gigabits per second (Gbit/s). The Ethernet standards comprise several wiring and signaling variants of the OSI physical layer in use with Ethernet.

If you would like to look up a domain name and get information about the host, you may look it up by doing a whois search.

The commands below will show you the IP address of your computer. If you use a home router to connect to the Internet, the IP shown from these commands will not be your public IP address (it will be your internal IP address). Internal usually IP address start with a 10.10 or 192.168.

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

Some large /8 blocks of IPv4 addresses , the former Class A network blocks, are assigned in whole to single organizations or related groups of organizations, either by the Internet Corporation for Assigned Names and Numbers (ICANN), through the Internet Assigned Numbers Authority (IANA), or a regional Internet registry.

As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University , formerly using 36.0.0.0/8 (now to APNIC ) have returned their allocated blocks to assist in the delay of the exhaustion date.

Ethernet / ˈ iː θ ər n ɛ t / is a family of computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). [1] It was commercially introduced in 1980 and first standardized in 1983 as IEEE 802.3 , [2] and has since been refined to support higher bit rates and longer link distances. Over time, Ethernet has largely replaced competing wired LAN technologies such as token ring , FDDI and ARCNET.

The original 10BASE5 Ethernet uses coaxial cable as a shared medium , while the newer Ethernet variants use twisted pair and fiber optic links in conjunction with hubs or switches. Over the course of its history, Ethernet data transfer rates have been increased from the original 2.94 megabits per second (Mbit/s) [3] to the latest 100 gigabits per second (Gbit/s). The Ethernet standards comprise several wiring and signaling variants of the OSI physical layer in use with Ethernet.

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

Some large /8 blocks of IPv4 addresses , the former Class A network blocks, are assigned in whole to single organizations or related groups of organizations, either by the Internet Corporation for Assigned Names and Numbers (ICANN), through the Internet Assigned Numbers Authority (IANA), or a regional Internet registry.

As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University , formerly using 36.0.0.0/8 (now to APNIC ) have returned their allocated blocks to assist in the delay of the exhaustion date.

Ethernet / ˈ iː θ ər n ɛ t / is a family of computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). [1] It was commercially introduced in 1980 and first standardized in 1983 as IEEE 802.3 , [2] and has since been refined to support higher bit rates and longer link distances. Over time, Ethernet has largely replaced competing wired LAN technologies such as token ring , FDDI and ARCNET.

The original 10BASE5 Ethernet uses coaxial cable as a shared medium , while the newer Ethernet variants use twisted pair and fiber optic links in conjunction with hubs or switches. Over the course of its history, Ethernet data transfer rates have been increased from the original 2.94 megabits per second (Mbit/s) [3] to the latest 100 gigabits per second (Gbit/s). The Ethernet standards comprise several wiring and signaling variants of the OSI physical layer in use with Ethernet.

If you would like to look up a domain name and get information about the host, you may look it up by doing a whois search.

The commands below will show you the IP address of your computer. If you use a home router to connect to the Internet, the IP shown from these commands will not be your public IP address (it will be your internal IP address). Internal usually IP address start with a 10.10 or 192.168.

In the internet there are several places that show you how to get an IP address. And a lot of them look like this example:

With this example I get several IP addresses, but I''m only interested in getting the one that the router assigns to the computer running the program: the IP that I would give to someone if he wishes to access a shared folder in my computer for instance.

6

Self assigned IP address means the Mac is setup to receive its IP address from the router but the router isn t giving it one. So you need to log into the router from your Dell. You said you tried to connect to 192.168.0.1. This is usually the correct IP address for a D-Link router but the manual for this model http://ftp.dlink.ru/pub/ADSL/DSL-2640U/Description/DSL-2640U_B2_Manual.pdf says it s 192.168.1.1. So try that. The username AND password are both admin. Once you get in click on the LAN button and configure it for DHCP and give it an address range in the 192.168.1.x range (it will probably default to a recommended range). Remember for your Macbook Pro you can use either Wireless or wired Ethernet so go ahead and enable the wireless while you re at it.

7

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

Some large /8 blocks of IPv4 addresses , the former Class A network blocks, are assigned in whole to single organizations or related groups of organizations, either by the Internet Corporation for Assigned Names and Numbers (ICANN), through the Internet Assigned Numbers Authority (IANA), or a regional Internet registry.

As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University , formerly using 36.0.0.0/8 (now to APNIC ) have returned their allocated blocks to assist in the delay of the exhaustion date.

Ethernet / ˈ iː θ ər n ɛ t / is a family of computer networking technologies commonly used in local area networks (LAN), metropolitan area networks (MAN) and wide area networks (WAN). [1] It was commercially introduced in 1980 and first standardized in 1983 as IEEE 802.3 , [2] and has since been refined to support higher bit rates and longer link distances. Over time, Ethernet has largely replaced competing wired LAN technologies such as token ring , FDDI and ARCNET.

The original 10BASE5 Ethernet uses coaxial cable as a shared medium , while the newer Ethernet variants use twisted pair and fiber optic links in conjunction with hubs or switches. Over the course of its history, Ethernet data transfer rates have been increased from the original 2.94 megabits per second (Mbit/s) [3] to the latest 100 gigabits per second (Gbit/s). The Ethernet standards comprise several wiring and signaling variants of the OSI physical layer in use with Ethernet.

If you would like to look up a domain name and get information about the host, you may look it up by doing a whois search.

The commands below will show you the IP address of your computer. If you use a home router to connect to the Internet, the IP shown from these commands will not be your public IP address (it will be your internal IP address). Internal usually IP address start with a 10.10 or 192.168.

In the internet there are several places that show you how to get an IP address. And a lot of them look like this example:

With this example I get several IP addresses, but I'm only interested in getting the one that the router assigns to the computer running the program: the IP that I would give to someone if he wishes to access a shared folder in my computer for instance.

I have been working with various Cisco devices for many years now. Even though I hold a valid CCNP , I didn’t had the chance to work during the past months with Cisco devices as much as I was when I was actively working in the ISP field. Sill, from time to time I take on small consulting Cisco related projects. This post will show how to overcome the frustration on the top line Cisco ASA firewalls not supporting interface ip aliases.

Now, why would I need this? Maybe I have several network ranges behind the ASA, and for whatever reason I don’t need them in separate vlans (my switches don’t support vlans, I have ips from both ranges configured on some systems, etc.) and I don’t what to pay a lot of money to just enable more vlans on the box, etc.

Some large /8 blocks of IPv4 addresses , the former Class A network blocks, are assigned in whole to single organizations or related groups of organizations, either by the Internet Corporation for Assigned Names and Numbers (ICANN), through the Internet Assigned Numbers Authority (IANA), or a regional Internet registry.

As IPv4 address exhaustion has advanced to its final stages, some organizations, such as Stanford University , formerly using 36.0.0.0/8 (now to APNIC ) have returned their allocated blocks to assist in the delay of the exhaustion date.